For use as duct bedding

A sharp washed grit sand ideally suited for laying flags or block paving  Also used in equestrian applications for runs, exercise rings etc.

General fill material for filling round ducts, cables etc...
Can be mixed with cement to bed flags onto.

General fill material for forming a solid base under paths and driveways. Easy to grade out due to its relativily small size.

A graded aggregate which is washed and tested for use in high quality concrete

Can be used for paths and borders or as a dashing chipping

Single sized aggregates used for bedding drainage pipes or for soakaways. Can also be used as decorative chippings around paths and driveways.

Single sized aggregates used for bedding drainage pipes or for soakaways.

A high quality aggregate specifically tested for use on road works

Bulk fill material used as a capping layer for roads, compounds and storage areas, ideal for providing solid base

For use in drainage layers / soakaways

Large sized crushed limestone used to fill gabion baskets, can be produced to sizes to suit required specification.

Can be used as a facing or walling stone

A mixture of 20-5mm concreting aggregate, paving sand and sharp sand used for site mixed concrete when mixed with cement

Fill provides base for under paths, driveways, slabs and tracks manufactured from construction waste typically comprising concrete, brick, tarmac, various types of stone. A more economic and environmentally friendly alternative to new stone.

Single sized aggregates used for bedding drainage pipes or for soakaways. Manufactured from construction waste typically comprising concrete, brick, tarmac, various types of stone.  A more economic and environmentally advantageous alternative to new stone.

Single sized aggregates used for bedding drainage pipes or for soakaways. Manufactured from construction waste typically comprising concrete, brick, tarmac, various types of stone.  A more economic and environmentally advantageous alternative to new stone.

Single sized aggregates used for bedding drainage pipes or for soakaways. Manufactured from construction waste typically comprising concrete, brick, tarmac, various types of stone.  A more economic and environmentally advantageous alternative to new stone.

A high quality aggregate specifically tested for use on road works manufactured from construction waste typically comprising concrete, brick, tarmac, various types of stone. A more economic and environmentally friendly alternative to new stone. A more economic and environmentally advantageous alternative to new stone.

Bulk fill material used as a capping layer for roads, compounds and storage areas, ideal for providing solid base manufactured from construction waste typically comprising concrete, brick, tarmac and various types of stone. A more economic and environmentally advantageous alternative to new stone

Primary fill is a mix of clays and stone with a maximum size of 75mm which is generally used as a fill material covered by a capping of either 6F5 or sub-soil. It is often used on embankments or where an economic material is required to build up levels. A more economic and environmentally advantageous alternative to new stone.

General fill material for forming a solid base under paths and driveways. Easy to grade out due to its relativily small size.

General fill material for forming a solid base under paths and driveways. Easy to grade out due to its relativily small size.

Bulk fill material used as a capping layer for roads, compounds and storage areas, ideal for providing solid base.

Single sized slate used for bedding drainage pipes or for soakaways.

A high quality aggregate specifically tested for use on road works manufactured from construction waste typically comprising concrete, brick, tarmac, various types of stone. A more economic and environmentally friendly alternative to new stone. A more economic and environmentally advantageous alternative to new stone.

Bulk fill material used as a capping layer for roads, compounds and storage areas, ideal for providing solid base manufactured from construction waste typically comprising concrete, brick, tarmac and various types of stone. A more economic and environmentally advantageous alternative to new stone

Tarmc scalpings from the upper layer of the tarmac surface which compact well to provide a hard wearing surface.

Top-soil and sub-soil can be supplied subject to availability and this can be 'as dug' or graded to 20mm or 40mm as required

A fine (soft) sand mixed with cement for brick and block laying

Plastering sand is coarser grade of sand used for rendering and stone work

Blue slate or blue/green chippings provide a contrast to the local limestone or complement the slate colours when used on driveways and paths   

Delivered by crane wagon

For small quantities up to 4 tonnes tipped loose per load

If access is restricted the 6 wheel tipper can still deliver up to 16 tonnes per load

The standard delivery for bulk material delivered to site with load sizes up to 20 tonnes

If large volumes need to be transferred over greater distances and site conditions are acceptable the articulated tipper can deliver up to 28 T per load

Aggregates can be delivered in skips or hookloader bodies which are left at the site. Once the aggregate is removed the skip or body can be filled with excavation waste which we can collect and dispose.

The Grab can place aggregates saving labour and plant. They can also collect spoil from site for disposal or recycling.

Materials can also be collected with your own transport subject to notification and compliance with our policies

Small quantities can be collected from our yard where we stock the most popular range of products